The
FlowerTM
(pat.pend.)concept |
Gearless
drive
in the back |
Double-drive |
|
The
easiest and most accessible print unit in the market:
the group opens like a Flower, each
element separates and becomes independent and
immediately accessible.
|
The same
high precision belts used in the car industry are used
to drive the print units: the drive is more accurate,
and the wear of the gearboxes is eliminated.
|
The
drives for the die-cutting and for the printing are
two and fully separated. Vibrations are not
transmitted to the print section, even at high speeds.
|
The
PitagoraTM
(pat.pend.)concept: |
Helical
gears
in the front |
OrganizerTM
|
| "3
pressure point " configuration, without guides.
All the tolerances are recuperated, for the best print
stability at high speeds, and during the years. |
Only
DIN Class 5/6 helical gears are used in the front
drive for the smoothest transmission to the anilox
roller and to the print cylinder. |
Athree
axis lifting mechanism
on a crossed rail system is integrated in the
converting area. The operator never touches the dies,
and can organize them in a specially built-in storage
area after use.
|
CombatTM
(Combination
Advanced Technology) |
PGMP |
Mini-OrganizerTM |
The
platform configuration of
the CombatTM press is "open " to
changes. By adding new process heads, combination
printing and "creative " configurations are
possible.
|
The
Perfect Grip Multi Point (PGMP) makes tension on
unwind, printing, die-cutting and rewind independently
controlled for better tension stability at high
speeds. |
Print
and magnetic cylinders are stored in the OrganizerTM
anilox, rubber rollers, doctor blades, ink trays,
Spider tools,
are integrated in a movable rack storage device.
|
| Spider
tools |
Jumbo
WashTM |
Grid
TM
(pat.pend.) |
With
the Spider tools the operator does not touch the ink
and holds a safe grip while handling with one hand
anilox rollers, rubber rollers and ink-trays. |
Cylinders,
ink trays, doctor blades, cans etc. contaminated by
ink are automatically washed and rinsed. While the
press runs in 10-15 minutes four print stations are
entirely washed and ready for printing.
|
The
die-cutting pressure tool is locked in a GridTM
cut into the steel frames of the press.
Deflections are greatly reduced to achieve perfect
die-cutting stability at high speeds.
|
