GeniusTM
(pat.pend) |
DDMTM
(Digital Data
Management) |
| The
set-up procedures are standardized by the GeniusTM
pre-register system. Wastes are
greatly reduced, and are predictable for each job and
each operator. |
S-Combat
uses a digital CAN-OPEN Bus communication system
connected to a central PLC. Digital data management
allows accurate information exchange and total system
control.
|
| ARC |
Free-landTM |
The
combination of the GeniusTMand of the
Automatic Register Control (ARC) make the operator
free from the register concern, register errors are not
possible.
|
Free-landTM
is a dedicated area where inspection instruments are
integrated without space problems, in a safe position. |
ILCTM
(Ink Level Control) |
S
– Inspection Concept |
The
level of ink in the tray is automatically controlled
and refilled. Color missing on the print and ink
splashing is avoided at any speed, ink is not a
variable to control.
|
As
controls needed in printing are reduced, the operator
can be dedicated to in-line quality inspection, using
inspection technologies to the requested quality
level.
|
| ILC
OrganizerTM |
Flag
MarkerTM |
Refilling
pipes are stored and organized, with automatic pipe
washing for quick ink
change-overs. The ILCTM is used for every
job and for frequent color changes.
|
A
mark is printed when an error is detected and
substitutes the flag in the reel. Instant error marking
reduces waste, and gives safe quality control.
|
|
Click-LockTM
|
Closed
loop inspection
|
Pressure
adjustments on the FlowerTM head are
measurable for quick and standardized set up, when the
thickness of the substrate changes.
|
The
flag-mark is read by an electronic device (the
"Box") which works on any inspection machine
(Omega, Arpeco, Rotoflex
etc.), making a closed-loop of the quality inspection
cycle.
|
